How to select the right substrates for your power modules

Direct Bonded Copper (DBC) and Active Metal Brazed (AMB) ceramic substrates are the most popular substrates for the assembly and packaging of IGBT and MOSFET bare dies in power modules. As a designer of power modules, you will have to select the right substrate for your application. In this webinar, you will learn how the ceramic grade, the ceramic thickness and copper thickness are influencing the isolation voltage, output power and reliability of your module. In only 3 steps, you will be able to find the best trade-off between the main characteristics of DBC / AMB substrates to fulfill the requirements of your application.

 

Speaker

 

  • Olivier Mathieu holds a master degree in material science from Institut National des Sciences Appliquées Rennes, France. Olivier has been with Rogers Corporation since 2006, working first as an application engineer to provide worldwide technical support for metallized ceramic substrates and micro channel coolers. Later he has taken over the head of technical marketing before being appointed product innovation manager for curamik product within Rogers’ PES division.


Related


USB Type C solutions

Diodes’ PI5USB30213A USB 3.1 Gen 1 and the PI5USB31213A USB 3.1 Gen 2 USB Type-C™ controllers with configuration channel (CC) logic and 5V VCONN sourcing are the most complete Type C s...

SiC MOSFETs in hard-switched half-bridges

Silicon carbide (SiC) MOSFETs are making major inroads into solar inverters. Engineers are keen to achieve high efficiency across the entire load range. SiC MOSFETs' low on-state resistance and ...

Cooling Options for PET and SPECT Scanners

Thermal management of medical imaging systems is more challenging than ever. Given the complexity of some PET and SPECT systems, the use of a custom designed liquid cooling systems with plug-and-play ...

Active Cooling of Optical Transceivers

The thermal solution for transceiver cooling in an outdoor environment yields an optimal solution to maintain form factor and minimize latency of a remote radio unit. Laird’s ATC line of min...

Performance Optimization of DC Link Systems

This webinar will review the design of the DC Link System using optimized solutions based on integrated capacitor-busbar technology from Rogers Corporation. Due to lower overshoot voltages and les...

Power challenges for IoT and data centers

Martin Hägerdal, Head of Ericsson Power Modules, and Bob Cantrell, the company's Senior Application Engineer, discuss the major drivers of product innovation in digital power modules. The...

Intelligent optimization of power

In this webtalk, Mark Adams, Senior VP at CUI, explains software defined power moving from the board level to its application in data centres or COLO facilities. Software defined power can enable ...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market, us...

USB 3.1 Type-C Solutions from TI and WE

The USB-C momentum is growing and quickly being adopted in a variety of end equipment. This new reversible & flippable ecosystem offers new possibilities for how applications will use and deli...

Simple-to-use, small and brushed motor driver

This Webtalk discusses the MAX14871 from Maxim Integrated, the industry’s simplest-to-use, smallest & most flexible brushed motor driver. It is explained why the part was designed - i.e....

Not all regulators are created equal

Power Engineers constantly find themselves making selections among linear regulators, switching regulators and how much integration they need in their systems. However, with the state of the art proce...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market...

Need help with your Sigma Delta Signal Chain?

Lifting the lid on Industry Leading Sigma Delta Technology for Industrial Environment. Understand the key trade-offs in performance, power and noise to optimise your signal chain performance and e...


Module solution for Industrial Ethernet

In this webtalk Renesas introduces a module solution for Industrial Ethernet called intelligent RJ45 (I-RJ45). The Industrial Ethernet module I-RJ45 is available in single and dual port versions i...

Fluffing the Cloud

The synergistic development aspect of electronic design was very apparent these past weeks at the APEC and Embedded World shows, as engineers from around the globe came together in San Antonio, Texas,...

Leading standards in the wireless charging market

Wireless charging is about to become mainstream for many applications. Already today, a lot of wireless charging solutions for smartphones are available - either table chargers or chargers install...

 


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...


Ted Marena of Microsemi talks about their scope-free on-chip debug tools

In this video Ted Marena of Microsemi talks about their scope-free on-chip debug tools with Alix Paultre at Embedded World 2018. SmartDebug tool works with the Microsemi FPGA array and SERDES without ...


Infineon demonstrates their iMotion motor control solution at Embedded World

In this video Infineon explains their latest  IMC100 series iMOTION motor control IC at Embedded World 2018 in Nuremberg. The device provides a ready-to-use solution for high-efficiency variable-...


Samsung goes over their new ARTIK IoT development system

In this video James Stansberry of Samsung talks to Alix Paultre about their ARTIK IoT development system at Embedded World in Nuremberg. The family of system-on-modules provide a complete, production-...


Cypress explains their latest low-power 32-bit Arm Cortex-M4 PSoC 6

In this video Allen Hawes of Cypress Semiconductor talks to Alix Paultre about their latest low-power 32-bit Arm Cortex-M4 PSoC 6, designed to provide a secure high-performance MCU for next-generation...